Toilet Renovation Vol.5: Accessories Removal

u270fufe0f Originally published: January 6, 2017 / ud83dudd04 Rewritten: May 8, 2026

u270fufe0f 2026 Update from DIY Dad: Key Points for the Finishing Stage

We’re now at the finishing phase of the toilet renovation. Once all the accessories are removed, it’s time for the floor and wall finish work. Because a toilet is such a small, compact space, the quality of the finish is immediately obvious. ^ ^

Removing Toilet Accessories (Paper Holder, Towel Ring, etc.)

Before applying wallpaper or diatomite plaster, remove everything attached to the walls.

What to Remove

• Toilet paper holder
• Towel ring / storage shelf
• Outlet cover plate
• Light fixture (if needed)
• Ventilation fan cover

If you try to work around these items, your finish will look sloppy. It’s a rule: no matter how tedious it is, remove everything first. m(_ _)m

Floor Repair and Cushion Floor Replacement

After removing the toilet bowl, you’ll be left with anchor bolt holes in the floor. If the new toilet’s drain flange aligns with the existing holes, you can go straight to laying the new cushion floor (CF) and installing the new toilet.

The hardest part of cutting CF is cutting out the hole for the drain flange. Make a paper template and cut carefully.

DIY Dad’s tip: Make the template for the drain area slightly smaller than the actual opening, then gradually expand it on-site for a better fit without over-cutting. ^ ^

Why I Chose Diatomite for the Toilet Walls

For this toilet renovation I applied diatomite plaster to the walls instead of wallpaper. My reasons:

• It absorbs moisture and odors (diatomite’s natural humidity-control and deodorizing properties)
• I’d already used it in the Japanese-style room with great results, so I continued with it
• It creates a more distinctive, premium look than wallpaper

Diatomite does take some practice to apply well, but in a small space like a toilet it’s also a great opportunity to build your technique. DIY Dad’s trowel skills improved considerably working in this tight space. (Lol) u0669( u141b )u0648

Diatomite Application Tips (Toilet Edition)

1. Thoroughly mask around the toilet bowl and tank with masking tape
2. Protect the water supply pipe and shutoff valve with plastic wrap
3. Mask around the ventilation opening and outlet
4. Peel off masking tape immediately after applying u2014 before it dries

If you wait until the diatomite dries before peeling the tape, it will tear the surface with it. The rule is: peel the moment you finish applying. m(_ _)m

As a Landlord: Cleanliness u00d7 Functionality Changes Your Occupancy Rate

A toilet with diatomite walls, brand-new cushion flooring, and a fresh washlet-equipped bowl u2014 the reaction from prospective tenants was noticeably different. I heard “Wow, this bathroom is so clean!” again and again. ^ ^

Total material cost for the DIY toilet renovation: around u00a580,000. A contractor would charge u00a5300,000u2013500,000 for the same work. Huge savings through DIY.

ud83dudebd For Anyone Considering a Toilet Renovation

Even just replacing the toilet bowl can dramatically change the feel of the space. Going from a tank-type to a tankless toilet in this property gave the room a completely different sense of spaciousness. ^ ^

Water leaks and clogs get worse if ignored u2014 call a professional right away when trouble strikes.

24-Hour Emergency Plumbing Service u2014 Toilet & Water Trouble u00bb

Hi there, it’s DIY Dad. ^ ^
Happy Friday! Coming right off the New Year break and already another long weekend is coming up. Going to be hard to avoid overdoing it again. u266a(*^^)ou2200*u2200o(^^*)u266a

Continuing on with the 1st-floor toilet renovation. Next up: removing the outlet panel, towel bar, paper holder, and ventilation fan. Tools and materials: impact driver, screwdriver, masking tape.

First, removing the outlet next to the toilet. I opened the outlet cover u2014 and the outlet bracket was completely corroded! (-_-;) Rust all over, crumbling apart. The back of the outlet where the wiring connects was covered with a greenish solid residue. (-uff61-; I’d just seen the deeply stained floor left by the old toilet bowl, so at this point I was barely surprised. d(uffe3 uffe3) Impressive that it hadn’t shorted out. ^^; The outlet bracket was so disgusting I just tossed it u2014 unfortunately missed getting a photo. (._.)

Next, removing the ventilation fan. The cover is a clip-on type. I popped it off:

u2191 Ventilation fan cover.

u2191 The fan blade u2014 absolutely packed with dust! I gave it a thorough rinse under running water.

u2191 After cleaning u2014 sparkling clean! ^ ^ That’s all for today! (^^)/~~~

同じカテゴリの記事を読む

8棟自主管理の経験から書いた関連記事 — まとめて読むと理解が深まります

▸ English

Building a Simple Pergola Over Your Deck

▸ DIY Repairs

How to Install and Replace Light Fixtures in Japanese Rental Properties

▸ English

Does Property Value Appreciate in Japan? What Investors Need to Know

▸ English

How DIY Renovation Increases Rental Property Value in Japan

▸ English

How to Evaluate a Property Listing in Japan Before Making an Offer

▸ English

Apt.1 2F Japanese Room: Ceiling Repair Vol.4